PHP Wrapper在SAE上的应用方法
author:一佰互联 2019-04-27   click:146

本文讲述了PHP Wrapper在SAE上的应用方法。分享给大家供大家参考,具体如下:

一、PHP Wrapper是什么

自PHP 4.3开始,PHP开始允许用户通过stream_wrapper_register()自定义URL风格的协议。用户使用fopen(), copy()等文件系统函数对封装协议进行操作时,PHP会调用注册协议时所提供的类中相应的函数。
PHP手册中给了一个例子,它将VariableStream类注册为var://协议,通过这个协议,用户可以使用文件系统函数直接读写全局变量。例如,用户可以通过 “var://foo” 读写 $GLOBALS["foo"] 。

二、SAE为什么需要PHP Wrapper

出于性能和安全方面的考虑,SAE平台上禁用了本地文件读写和对外的数据抓取。相应的,我们提供了对应的服务来做同样的事情。

由于新服务的接口和PHP本身的接口不太一样,专门为我们平台开发的程序当然不会存在问题,但是大量已有的程序和开源项目,就面临着繁杂的迁移工作。而使用PHP Wrapper对我们的服务的接口进行封装之后,用户就可以更方便地将程序迁移到SAE平台。

三、如何写PHP Wrapper

要通过PHP Wrapper封装一个协议,首先,我们需要写一个 streamWrapper 类,类名可自定义,类的格式为:

streamWrapper {
public resource $context ;
__construct ( void )
public bool dir_closedir ( void )
public bool dir_opendir ( string $path , int $options )
public string dir_readdir ( void )
public bool dir_rewinddir ( void )
public bool mkdir ( string $path , int $mode , int $options )
public bool rename ( string $path_from , string $path_to )
public bool rmdir ( string $path , int $options )
public resource stream_cast ( int $cast_as )
public void stream_close ( void )
public bool stream_eof ( void )
public bool stream_flush ( void )
public bool stream_lock ( mode $operation )
public bool stream_open ( string $path , string $mode , int $options , string &$opened_path )
public string stream_read ( int $count )
public bool stream_seek ( int $offset , int $whence = SEEK_SET )
public bool stream_set_option ( int $option , int $arg1 , int $arg2 )
public array stream_stat ( void )
public int stream_tell ( void )
public int stream_write ( string $data )
public bool unlink ( string $path )
public array url_stat ( string $path , int $flags )
}

类中各方法说明:

streamWrapper::__construct — 构造函数,仅在stream_open前被调用
streamWrapper::dir_closedir — 关闭目录句柄,响应closedir()函数
streamWrapper::dir_opendir — 打开目录句柄,响应opendir()函数
streamWrapper::dir_readdir — 从目录句柄读取条目,响应readdir()函数
streamWrapper::dir_rewinddir — 倒回目录句柄,响应rewinddir()函数
streamWrapper::mkdir — 创建目录,响应mkdir()函数
streamWrapper::rename — 目录或文件重命名,响应rename()函数
streamWrapper::rmdir — 删除目录,响应rmdir()函数
streamWrapper::stream_cast — 检索基础资源,响应stream_select()函数
streamWrapper::stream_close — 关闭资源,响应fclose()函数
streamWrapper::stream_eof — 检查文件指针是否已经在文件末尾,响应feof()函数
streamWrapper::stream_flush — 清除输出缓存,响应fflush()函数
streamWrapper::stream_lock — 咨询文件锁定,响应flock()函数
streamWrapper::stream_open — 打开文件或URL为流,响应fopen()函数
streamWrapper::stream_read — 从流中读取内容,响应fread(), fgets()函数
streamWrapper::stream_seek — 在流中定位指针,响应fseek()函数
streamWrapper::stream_set_option — 改变流设置
streamWrapper::stream_stat — 检索文件资源的信息,响应fstat()函数
streamWrapper::stream_tell — 检索流中指针的位置,响应ftell()函数
streamWrapper::stream_write — 向流中写入内容,响应fwrite(), fputs()函数
streamWrapper::unlink — 删除文件,响应unlink()函数
streamWrapper::url_stat — 检索文件的信息,响应所有stat()相关的函数,例如file_exists(), is_dir(), is_file(), filesize(), fileinode()等等

详细说明请参考PHP手册:http://cn2.php.net/manual/en/class.streamwrapper.php

写好streamWrapper类之后,使用 stream_wrapper_register () 将这个类注册到Wrapper中,就可以开始使用了。函数使用方法为:

bool stream_wrapper_register ( string $protocol , string $classname [, int $flags = 0 ] )

例如:

stream_wrapper_register("saemc", "SaeMemcacheWrapper");

由于SAE平台不支持对本地文件的写操作,因此Smarty之类的一些需要在本地写文件的开源项目就没办法直接在SAE平台上使用,而有了saemc Wrapper,用户就可以将Smarty编译的模板保存在MC中,很方便的将Smarty迁移到SAE平台上来。

在附件中我们为大家提供了SAE上Memcache Wrapper的实现代码,大家可以下载此附件进行测试。

在测试之前,需要先在本地启动一个端口为22222的Memcached服务:

memcached -m 10 -p 22222 -u nobody -l 127.0.0.1

然后使用下面代码就可以测试了:

//包含附件代码,注册saemc Wrapper
include_once("wrapper.php");
//测试 saemc Wrapper
$fp = fopen( "saemc://test.txt", "w+" ) or die("fopen faild!");
fwrite( $fp, "line1
" ) or die("fwrite line1 faild!");
fwrite( $fp, "line2
" ) or die("fwrite line2 faild!");
fwrite( $fp, "line3
" ) or die("fwrite line3 faild!");
var_dump(ftell($fp));
fseek( $fp, 0 );
while ( !feof( $fp ) ) {
    $c = fgets( $fp ) or die("fgets faild!");
      var_dump($c);
}
fclose( $fp );
var_dump(file_get_contents("saemc://test.txt"));
var_dump(file_put_contents("saemc://path/test.txt", "hello world!
"));
var_dump(file_put_contents("saemc://path/test.txt", "hello world!
", FILE_APPEND));
var_dump(file_get_contents("saemc://path/test.txt"));
var_dump(copy("saemc://path/test.txt", "saemc://path/test_new.txt"));
var_dump(file_get_contents("saemc://path/test_new.txt"));
var_dump(unlink("saemc://path/test.txt"));
var_dump(file_get_contents("saemc://path/test.txt"));
var_dump(rename("saemc://path/test_new.txt", "saemc://path/test.txt"));
var_dump(file_get_contents("saemc://path/test.txt"));
echo "====test include====
";
include_once("saemc://path/test.txt");

测试页面的输出结果:

int(18)
string(6) "line1
"
string(6) "line2
"
string(6) "line3
"
string(18) "line1
line2
line3
"
int(13)
int(13)
string(26) "hello world!
hello world!
"
bool(true)
string(26) "hello world!
hello world!
"
bool(true)
bool(false)
bool(true)
string(26) "hello world!
hello world!
"
====test include====
hello world!
hello world!

我们提供的 Memcache Wrapper并没有实现目录操作的一些方法和Memcache的Timeout,大家可以参考PHP手册,尝试实现目录操作,或者通过context使这个Wrapper支持Memcache的Timeout。

另外,大家可以到下面这个地址查看SAE Stdlib中sae_include的源码,在其中还有我们为Storage服务封装的saestor Wrapper和为Fetchurl服务重新封装的http Wrapper的实现:

http://stdlib.sinaapp.com/?f=sae_include.function.php

四、写Wrapper时的一些注意事项

1. 构造函数

streamWrapper 类很特别,它的构造函数并不是每次都调用的。只有在你的操作触发了stream_open相关的操作时才会调用,比如你用file_get_contents()了。而当你的操作触发和stream无关的函数时,比如file_exists会触发url_stat方法,这个时候构造函数是不会被调用的。

2. 读实现

Wrapper里边有Position和Seek等概念,但是很多服务其实是一次性就读取全部数据的,这个可以在stream_open的时候一次性读回,放到一个属性中,以后seek和tell的时候直接操作属性里边存放的数据就可以了。

3. 追加写实现

有很多服务是一次性写入所有数据,不支持追加写的功能(比如Memcache),这就需要我们自己在Wrapper中来实现追加写。可以将整个value一次性读取出来,将需要追加写的数据追加在读取出来的内容后面之后,再一次性写回。

但是这种追加写的实现方式性能会比较差,尤其是内容体积较大之后,一次性读取所有内容会非常消耗资源,因此在某些服务中我们不得不舍弃对追加写的支持。

4. url_stat的实现

在streamWrapper类的实现中,url_stat的实现是个难点。必须正确的实现url_stat才能使is_writable和is_readable等查询文件元信息的函数正常工作。

而我们需要为我们的虚设备伪造这些值。以mc为例,我们给大家一些参考数据:

url_stat应该返回一个数组,分13个项,内容如下:

dev 设备号 - 写0即可;
ino inode号 - 写0即可;
mode 文件mode - 这个是文件的权限控制符号,稍后详细说明;
nlink link - 写0即可;
uid uid - Linux上用posix_get_uid可以取到,windows上为0;
gid gid - Linux上用posix_get_gid可以取到,windows上为0;
rdev 设备类型 - 当为inode设备时有值;
size - 文件大小;
atime - 最后读时间 格式为unix时间戳;
mtime - 最后写时间;
ctime - 创建时间;
blksize - blocksize of filesystem IO 写零即可;
blocks - number of 512-byte blocks allocated 写零即可;

其中mode的值必须写对:

如果是文件,其值为:

0100000 + 文件权限,如 0100000 + 0777。

如果是目录,其值为:

040000 + 目录权限,如 0400000 + 0777。

5. 关于stat的缓存

PHP会在同一个页面的执行过程中对文件的元信息进行缓存。
根据PHP文档对 clearstatcache() 这个方法的说明得知:在使用 stat(), lstat(), file_exists(), is_writable(), is_readable(), is_executable(), is_file(), is_dir(), is_link(), filectime(), fileatime(), filemtime(), fileinode(), filegroup(), fileowner(), filesize(), filetype(), 或 fileperms() 方法查询文件信息时,PHP会将文件的stat的缓存以提高性能。 clearstatcache()方法可以用来清除这个缓存,当unlink()会自动清除stat缓存。

而实际上,PHP只有在对本地文件进行unlink, rename和rmdir操作时会清除stat缓存,而在通过其他的wrapper进行unlink, rename和rmdir操作时,并不会清除stat缓存。因此在写wrapper时我们要自己在unlink等方法中通过clearstatcache()来清除stat缓存。

点击此处下载附件。

更多关于PHP相关内容感兴趣的读者可查看本站专题:《php curl用法总结》、《php socket用法总结》、《PHP网络编程技巧总结》、《PHP基本语法入门教程》、《php操作office文档技巧总结(包括word,excel,access,ppt)》、《php日期与时间用法总结》、《php面向对象程序设计入门教程》、《php字符串(string)用法总结》、《php+mysql数据库操作入门教程》及《php常见数据库操作技巧汇总》

希望本文所述对大家PHP程序设计有所帮助。